KATO 1260401 N SCALE FEF-3 4-8-4 Steam Loco W tender Union Pacific 844 126-0401

katoJuly 11, 2019admin

N scale Union Pacific FEF-3 series 4-8-4 steam locomotive by Kato. Ready to run on your DC layout and DCC ready for your decoder. Requires 11″ (282mm) minimum turning radius on ground level track and 15″ (381mm) minimum turning radius on Viaduct track. A total of 45 FEF (four-eight-four) locomotives were built between 1937 and 1944, with the last 10 FEF-3s being delivered in 1944. After World War II, coal supplies were affected by a series of strikes. In order to safeguard operations, UP converted the 800s to oil burning, and a 6,000 US gallons tank was fitted in the bunker space. Otherwise, few modifications were needed to insure years of mainline service. These were the last steam locomotives delivered for the Union Pacific. Number 844, the last of the FEF-3 class, is the longest continuously operating 4-8-4 engine in the world, and the only one never retired by a Class I railroad. Like many of the “late era” steam locomotives, their final design was cut short by the advent of new monarchs of the rails, diesels. Today, FEF-3 #844 (at some times during history also known as #8444 to avoid numbering conflictions with a diesel loco) survives to pull excursion trains as a publicity locomotive for the Union Pacific, and is one the UP’s oldest operating locmotives. Accompanying the “living legend” FEF-3 is always at least one of a pair of Union Pacific Water Tenders, carrying spare water for the steam engine (Water filling stations being a rarity in the diesel era). These unique re-built cars have seen service as both Steam and Gas Turbine Electric fuel tenders before finally settling into their current forms as part of UP’s steam heritage fleet where they operate as separate (but always-present) cars. THANKS FOR YOUR INTEREST IN OUR ITEMS. The item “KATO 1260401 N SCALE FEF-3 4-8-4 Steam Loco W tender Union Pacific 844 126-0401″ is in sale since Thursday, May 23, 2019. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “greatdeals4uonline” and is located in Venice, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Iceland, Sri lanka, Luxembourg, Viet nam, Uruguay, Russian federation.

State of Assembly: Ready to Go/Pre-built
Power Supply: DC
Type: Steam Locomotive
Features: TENDER INCLUDED
MPN: 126-0401
Gauge: N SCALE
Brand: KATO
Grading: C-10 ;Mint-Brand New
Recommended Age Range: This Item Is Not a Toy. Recommended 14 Years Or Ol
Control: DC

N scale KATO 4-8-4 FEF-3 UP #844 Custom painted TTG Greyhound Overland New

scaleMay 23, 2019admin

N scale KATO 4-8-4 FEF-3 UP #844 Custom painted TTG Greyhound Overland brand new!!! Look at the pictures carefully as they are part of the description. The lines are very straight And in the proper location to the prototype. The decaling laid down Over every surface perfectly. Beautiful rivet detail throughout the entire model. Ive done a few of these and this is one of the best ones I have. Ive seen a few other attempts at this model and paint scheme. Please check out my other auctions for more great finds…. IF YOU HAVE A PROBLEM WITH YOUR ITEM WHEN IT ARRIVES, PLEASE CONTACT ME SO WE CAN WORK OUT THE PROBLEM BEFORE LEAVING FEEDBACK. Please note that International deliveries can take up to 4 weeks depending on where you are. Custom identification number will be sent for you to track when it gets to your country. BUYERS IN MEXICO: As per previous paragraph, custom identification number will be sent for you to track. I do not mark merchandise values below or mark items as “gifts” – US and International government regulations prohibit such behavior. The item “N scale KATO 4-8-4 FEF-3 UP #844 Custom painted TTG Greyhound Overland New” is in sale since Saturday, May 18, 2019. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “sharps308″ and is located in Layton, Utah. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Iceland, Sri lanka, Luxembourg, Viet nam, Uruguay, Russian federation.

Brand: KATO
Gauge: Standard
Modified Item: Yes
Power Supply: DC
Type: Steam Locomotive
Material: Plastic
Country/Region of Manufacture: Japan
Vehicle Type: Locomotive
Control: Analog
Color: Gray
State of Assembly: Ready to Go/Pre-built
Features: Painted
Grading: C-10 Mint-Brand New
Recommended Age Range: 14

N Scale KATO FEF-3 4-8-4’Union Pacific’ Road #844 DCC Ready Item #126-0401

scaleApril 15, 2019admin

The Union Pacific FEF (F our E ight F our), along with the GS-4 is easily one of the most recognizable US steam prototypes still in operation today. The FEF-3 series of steam locomotives was delivered in 1944 and were the last, and some of the largest, steam locomotives delivered for use by the Union Pacific. Today, FEF-3 #844 (at some times during history also known as #8444 to avoid numbering conflictions with a diesel loco) survives to pull excursion trains as a publicity locomotive for the Union Pacific, and is one the UP’s oldest operating locmotives. Accompanying the “living legend” FEF-3 is always at least one of a pair of Union Pacific Water Tenders, carrying spare water for the steam engine (Water filling stations being a rarity in the diesel era). These unique re-built cars have seen service as both Steam and Gas Turbine Electric fuel tenders before finally settling into their current forms as part of UP’s steam heritage fleet where they operate as separate (but always-present) cars. The Kato N Scale FEF-3 follows in the footsteps of its Southern Pacific 4-8-4 cousin. Refining the basic concept of a high-power, flexible steam locomotive which is easily upgradable to DCC by coupling a special, isolated coreless motor drive system with heavy duty flywheels and a flexible cross-braced suspension system that gives the locomotive a high torque, high traction grip that ensures constant and consistent pressure spread across the primary drivers. Another benefit of the coreless motor system is that the locomotive will have an extremely low starting voltage, giving the locomotive slow creeping speeds that will allow modelers to appreciate the complex arrangement of moving side rods that make steam operation so exciting. Other features, such as the locomotive’s unique “Centipede” style tender being fitted with special articulation mechanisms that appear seamless when observed but will bend and flex to allow the locomotive to navigate tighter corners than should otherwise be possible! New coreless motor design with dual brass flywheels for silky-smooth performance at all speeds, even slow crawls. Special cross-braced shock absorbers equalize the pressure on the locomotive drivers to maximize traction. Illuminated headlight and locomotive numberboards. DCC friendly design, allowing for easy drop-in installation of DCC. This locomotive is also available with DCC pre-installed from Kato USA! 11″ (282mm) Minimum turning radius on ground level track, 15″ (381mm) Minimum turning radius on Viaduct track. All detail parts installed. Excursion Version: White Driver rims, silver smokebox, gloss paint. The item “N Scale KATO FEF-3 4-8-4’Union Pacific’ Road #844 DCC Ready Item #126-0401″ is in sale since Thursday, March 14, 2019. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “prescotthobbies” and is located in Prescott, Arizona. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Iceland, Sri lanka, Luxembourg, Viet nam, Uruguay.

Non-Domestic Product: No
Modified Item: No
Type: Steam Locomotive
Features: DCC ready
MPN: 126-0401
Vehicle Type: Locomotive
Train Operating Company: Union Pacific Railroad
Brand: KATO
Grading: C-10 Mint-Brand New

N Scale KATO FEF-3 4-8-4’Union Pacific’ Road #838 DCC Ready Item #126-0402

scaleApril 12, 2019admin

The Union Pacific FEF (F our E ight F our), along with the GS-4 is easily one of the most recognizable US steam prototypes still in operation today. The FEF-3 series of steam locomotives was delivered in 1944 and were the last, and some of the largest, steam locomotives delivered for use by the Union Pacific. Today, FEF-3 #844 (at some times during history also known as #8444 to avoid numbering conflictions with a diesel loco) survives to pull excursion trains as a publicity locomotive for the Union Pacific, and is one the UP’s oldest operating locmotives. Accompanying the “living legend” FEF-3 is always at least one of a pair of Union Pacific Water Tenders, carrying spare water for the steam engine (Water filling stations being a rarity in the diesel era). These unique re-built cars have seen service as both Steam and Gas Turbine Electric fuel tenders before finally settling into their current forms as part of UP’s steam heritage fleet where they operate as separate (but always-present) cars. The Kato N Scale FEF-3 follows in the footsteps of its Southern Pacific 4-8-4 cousins, refining the basic concept of a high-power, flexible steam locomotive which is easily upgradable to DCC by coupling a special, isolated coreless motor drive system with heavy duty flywheels and a flexible cross-braced suspension system that gives the locomotive a high torque, high traction grip that ensures constant and consistent pressure spread across the primary drivers. Another benefit of the coreless motor system is that the locomotive will have an extremely low starting voltage, giving the locomotive slow creeping speeds that will allow modelers to appreciate the complex arrangement of moving side rods that make steam operation so exciting. Other features, such as the locomotive’s unique “Centipede” style tender being fitted with special articulation mechanisms that appear seamless when observed but will bend and flex to allow the locomotive to navigate tighter corners than should otherwise be possible! New coreless motor design with dual brass flywheels for silky-smooth performance at all speeds, even slow crawls. Special cross-braced shock absorbers equalize the pressure on the locomotive drivers to maximize traction. Illuminated headlight and locomotive numberboards. DCC friendly design, allowing for easy drop-in installation of DCC. This locomotive is also available with DCC pre-installed from Kato USA! 11″ (282mm) Minimum turning radius on ground level track, 15″ (381mm) Minimum turning radius on Viaduct track. All detail parts installed. Excursion Version: White Driver rims, silver smokebox, gloss paint. The item “N Scale KATO FEF-3 4-8-4’Union Pacific’ Road #838 DCC Ready Item #126-0402″ is in sale since Monday, April 30, 2018. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “prescotthobbies” and is located in Prescott, Arizona. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam, Uruguay, Iceland, Sri lanka, Luxembourg.

Type: Steam Locomotive
Features: DCC ready
MPN: 126-0402
Vehicle Type: Locomotive
Train Operating Company: Union Pacific Railroad
Brand: KATO
Grading: C-10 Mint-Brand New

Kato 1260402 N Scale 4-8-4 Fef-3 Loco/tender Union Pacific #838 Freight 126-0402

katoApril 12, 2019admin

Matte paint, graphite smokebox, black rimmed wheels. The Kato N Scale FEF-3 follows in the footsteps of its Southern Pacific 4-8-4 cousin, refining the basic concept of a high-power, flexible steam locomotive which is easily upgradable to DCC by coupling a special, isolated coreless motor drive system with heavy duty flywheels and a flexible cross-braced suspension system that gives the locomotive a high torque, high traction grip that ensures constant and consistent pressure spread across the primary drivers. Another benefit of the coreless motor system is that the locomotive will have an extremely low starting voltage, giving the locomotive slow creeping speeds that will allow modelers to appreciate the complex arrangement of moving side rods that make steam operation so exciting. Other features, such as the locomotive’s unique “Centipede” style tender being fitted with special articulation mechanisms that appear seamless when observed but will bend and flex to allow the locomotive to navigate tighter corners than should otherwise be possible! New coreless motor design with dual brass flywheels for silky-smooth performance at all speeds, even slow crawls. Special cross-braced shock absorbers equalize the pressure on the locomotive drivers to maximize traction. Illuminated headlight and locomotive numberboards. DCC friendly design, allowing for easy drop-in installation of DCC. 11″ (282mm) Minimum turning radius on ground level track, 15″ (381mm) Minimum turning radius on Viaduct track. All detail parts installed. N scale Union Pacific FEF-3 series 4-8-4 steam locomotive by Kato. Ready to run on your DC layout and DCC ready for your decoder. Requires 11″ (282mm) minimum turning radius on ground level track and 15″ (381mm) minimum turning radius on Viaduct track. The item “KATO 1260402 N SCALE 4-8-4 FEF-3 LOCO/TENDER UNION PACIFIC #838 FREIGHT 126-0402″ is in sale since Tuesday, June 12, 2018. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “greatdeals4uonline” and is located in Venice, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam, Uruguay, Iceland, Sri lanka, Luxembourg.

Power Supply: DC
Type: Steam Locomotive
Features: TENDER INCLUDED
MPN: 126-0402
Gauge: N SCALE
Train Operating Company: Union Pacific Railroad
Brand: KATO
Grading: C-10 ;Mint-Brand New
Recommended Age Range: This Item Is Not a Toy. Recommended 14 Years Or Ol
Control: DC, DCC READY

N Scale KATO FEF-3 4-8-4’Union Pacific’ With Factory DCC Item #126-0401-DCC

scaleMarch 31, 2019admin

The Union Pacific FEF (F our E ight F our), along with the GS-4 is easily one of the most recognizable US steam prototypes still in operation today. The FEF-3 series of steam locomotives was delivered in 1944 and were the last, and some of the largest, steam locomotives delivered for use by the Union Pacific. Today, FEF-3 #844 (at some times during history also known as #8444 to avoid numbering conflictions with a diesel loco) survives to pull excursion trains as a publicity locomotive for the Union Pacific, and is one the UP’s oldest operating locmotives. Accompanying the “living legend” FEF-3 is always at least one of a pair of Union Pacific Water Tenders, carrying spare water for the steam engine (Water filling stations being a rarity in the diesel era). These unique re-built cars have seen service as both Steam and Gas Turbine Electric fuel tenders before finally settling into their current forms as part of UP’s steam heritage fleet where they operate as separate (but always-present) cars. The Kato N Scale FEF-3 follows in the footsteps of its Southern Pacific 4-8-4 cousin. Refining the basic concept of a high-power, flexible steam locomotive which is easily upgradable to DCC by coupling a special, isolated coreless motor drive system with heavy duty flywheels and a flexible cross-braced suspension system that gives the locomotive a high torque, high traction grip that ensures constant and consistent pressure spread across the primary drivers. Another benefit of the coreless motor system is that the locomotive will have an extremely low starting voltage, giving the locomotive slow creeping speeds that will allow modelers to appreciate the complex arrangement of moving side rods that make steam operation so exciting. Other features, such as the locomotive’s unique “Centipede” style tender being fitted with special articulation mechanisms that appear seamless when observed but will bend and flex to allow the locomotive to navigate tighter corners than should otherwise be possible! New coreless motor design with dual brass flywheels for silky-smooth performance at all speeds, even slow crawls. Special cross-braced shock absorbers equalize the pressure on the locomotive drivers to maximize traction. Illuminated headlight and locomotive numberboards. DCC friendly design, allowing for easy drop-in installation of DCC. This locomotive is also available with DCC pre-installed from Kato USA! 11″ (282mm) Minimum turning radius on ground level track, 15″ (381mm) Minimum turning radius on Viaduct track. All detail parts installed. Excursion Version: White Driver rims, silver smokebox, gloss paint. The item “N Scale KATO FEF-3 4-8-4’Union Pacific’ With Factory DCC Item #126-0401-DCC” is in sale since Monday, April 30, 2018. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “prescotthobbies” and is located in Prescott, Arizona. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam, Uruguay, Iceland, Sri lanka, Luxembourg.

Non-Domestic Product: No
Modified Item: No
Type: Steam Locomotive
Features: DCC fitted
MPN: 126-0401-DCC
Vehicle Type: Locomotive
Train Operating Company: Union Pacific Railroad
Brand: KATO
Grading: C-10 Mint-Brand New

Kato N Scale 126-0401-1 Union Pacific Fef-3 4-8-4 Steam Engine & Tender #844 Ma

katoFebruary 14, 2019admin

PLEASE ALSO CHECK MY OTHER AUCTIONS OF ITEMS.. LIKE NEW CONDITION WITH ORIGINAL BOX. BOX SHOWN MINOR SHELF WEAR. ENGINE TEST: RUN BOTH DIRECTIONS WITH WORKING HEAD LIGHT. E REFER TO PHOTOS FOR DETAILS & CONDITION AS THEY WILL BE PART OF OUR DESCRIPTION. The item “KATO N SCALE 126-0401-1 UNION PACIFIC FEF-3 4-8-4 STEAM ENGINE & TENDER #844 MA” is in sale since Saturday, February 27, 2016. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “lui724″ and is located in Hacienda Heights, California. This item can be shipped worldwide.

Material: Plastic
Gender: Boys & Girls
Brand: Kato
Power Supply: DC
Country/Region of Manufacture: Japan
Grading: C-8 Like New
Gauge: N SCALE
Control: Analog

Kato 12605-2 UP (Union Pacific) FEF-3 Steam Locomotive #844 (Black) (N scale)

katoDecember 19, 2018admin

Train Model N Scale Steam Locomotive. UP (Union Pacific) FEF-3 Steam Locomotive #844 (Black). Brand new / Factory sealed (All pictures shown on our list are taken from other packages). Working head light Equipped with flywheel drive Minimum radius R282. Check our other N scale locomotives HERE. Canada Australia New Zealand. France Germany Italy Spain. (USA, Canada and Australia). The item “Kato 12605-2 UP (Union Pacific) FEF-3 Steam Locomotive #844 (Black) (N scale)” is in sale since Thursday, September 20, 2018. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “plazajapan” and is located in Ships from. This item can be shipped to United States, all countries in Europe, Canada, Australia.

Brand: Kato
MPN: 12605-2
Country/Region of Manufacture: Japan

Kato N Scale 12605-2 Union Pacific Railroad UP FEF-3 Steam Locomotive #844 new

katoDecember 14, 2018admin

5.0038×30.099×7.2898. Age: 8 years and older. Please do the cancellation order when the address correction is necessary. Most of my products follow the Japanese electrical standard. All Japanese electric machineries operate at 95V-105 V (50Hz-60 Hz). Therefore, please do not use this product at a voltage over 105V! Since the United States uses voltages of 110V-120V, it cannot be used in the US. It also cannot be used at 220V-240V. One way to deal with this problem is to use a step-down transformer. There are important points in using a step-down transformer. If a machine you are using a transformer with has motor or generates heat, you will need a transformer with three times the wattage of the machine. For example, if the product operates at 100W, you will need a transformer with a capacity of 300W. This is because the machine needs two to three times the amount of electric power than normal to start up. Please be aware that deficiencies in capacity can lead to breakdown of the transformer or the product, and, in the worst case, can cause a fire. The plug type in Japan is type A. Plug types also differ across countries, so please use a conversion adapter to change the plug to type A if plug types are different. Conversion adapters also have electric power limits, so please use them accordingly. There are some conversion adapters that are originally designed to handle 100V-240V, so you can check the instructions on them about electrical outputs. If a conversion adapter can handle the electric power, all you need to do to use the product in your country is to change the plug to type A. In addition, most issues that result in being unable to turn on the product is due to the breaking down from using the incorrect transformer. If you insist on exchanging or returning the product, I will send the product to the factory for inside inspection. Caution: I will not be held responsible for any accident caused by using a wrong step-down transformer. Also, I cannot provide individual support due to different electric powers across countries and areas. We are providing Japanese products chosen carefully from many things for customer like you!! Customer is our friends. We are here to make you happy!!! We always make sure you will get what you want with prompt manner. Is there any thing in which you are needed at an item of Japan? I connect your country and Japan. It will surely be helpful to you. International Buyers – Please Note. The item “Kato N Scale 12605-2 Union Pacific Railroad UP FEF-3 Steam Locomotive #844 new” is in sale since Thursday, February 11, 2016. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “jcustom3″ and is located in Tokyo. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: Cato
UPC: 4949727662480
MPN: 12605-2

KATO 1260401 N SCALE FEF-3 4-8-4 Steam Loco W tender Union Pacific 844 126-0401

katoNovember 26, 2018admin

N scale Union Pacific FEF-3 series 4-8-4 steam locomotive by Kato. Ready to run on your DC layout and DCC ready for your decoder. Requires 11″ (282mm) minimum turning radius on ground level track and 15″ (381mm) minimum turning radius on Viaduct track. A total of 45 FEF (four-eight-four) locomotives were built between 1937 and 1944, with the last 10 FEF-3s being delivered in 1944. After World War II, coal supplies were affected by a series of strikes. In order to safeguard operations, UP converted the 800s to oil burning, and a 6,000 US gallons tank was fitted in the bunker space. Otherwise, few modifications were needed to insure years of mainline service. These were the last steam locomotives delivered for the Union Pacific. Number 844, the last of the FEF-3 class, is the longest continuously operating 4-8-4 engine in the world, and the only one never retired by a Class I railroad. Like many of the “late era” steam locomotives, their final design was cut short by the advent of new monarchs of the rails, diesels. Today, FEF-3 #844 (at some times during history also known as #8444 to avoid numbering conflictions with a diesel loco) survives to pull excursion trains as a publicity locomotive for the Union Pacific, and is one the UP’s oldest operating locmotives. Accompanying the “living legend” FEF-3 is always at least one of a pair of Union Pacific Water Tenders, carrying spare water for the steam engine (Water filling stations being a rarity in the diesel era). These unique re-built cars have seen service as both Steam and Gas Turbine Electric fuel tenders before finally settling into their current forms as part of UP’s steam heritage fleet where they operate as separate (but always-present) cars. THANKS FOR YOUR INTEREST IN OUR ITEMS. The item “KATO 1260401 N SCALE FEF-3 4-8-4 Steam Loco W tender Union Pacific 844 126-0401″ is in sale since Wednesday, June 20, 2018. This item is in the category “Toys & Hobbies\Model Railroads & Trains\N Scale\Locomotives”. The seller is “greatdeals4uonline” and is located in Venice, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

State of Assembly: Ready to Go/Pre-built
Power Supply: DC
Type: Steam Locomotive
Features: TENDER INCLUDED
MPN: 126-0401
Gauge: N SCALE
Brand: KATO
Grading: C-10 ;Mint-Brand New
Recommended Age Range: This Item Is Not a Toy. Recommended 14 Years Or Ol
Control: DC

Steam Locomotive Scale

Tag Archives: fef-3

KATO 1260401 N SCALE FEF-3 4-8-4 Steam Loco W tender Union Pacific 844 126-0401

N scale KATO 4-8-4 FEF-3 UP #844 Custom painted TTG Greyhound Overland New

N Scale KATO FEF-3 4-8-4’Union Pacific’ Road #844 DCC Ready Item #126-0401

N Scale KATO FEF-3 4-8-4’Union Pacific’ Road #838 DCC Ready Item #126-0402

Kato 1260402 N Scale 4-8-4 Fef-3 Loco/tender Union Pacific #838 Freight 126-0402

N Scale KATO FEF-3 4-8-4’Union Pacific’ With Factory DCC Item #126-0401-DCC

Kato N Scale 126-0401-1 Union Pacific Fef-3 4-8-4 Steam Engine & Tender #844 Ma

Kato 12605-2 UP (Union Pacific) FEF-3 Steam Locomotive #844 (Black) (N scale)

Kato N Scale 12605-2 Union Pacific Railroad UP FEF-3 Steam Locomotive #844 new

KATO 1260401 N SCALE FEF-3 4-8-4 Steam Loco W tender Union Pacific 844 126-0401