Turntable is indispensable for enjoying steam locomotives. The definitive steam locomotive structure! Reproduction of a type with a relatively shallow pit, called a “lower road type, ” with specifications designed for ease of use that are also compatible with sit-down operation. The track arrangement angle of the turntable is 10°. Outer diameter of the main body is 217mm. 160mm turntable girder length allows for large steamers! The thickness of the turntable is 12mm, 5mm thicker than the 7mm of Unitrack’s track top surface. Height adjustment outside of adjacent tracks. Automatic auto-locking advance system with left/right rotation and stop and precise drive by controller switch operation. Realistic turning speed of approximately 1 minute per lap. Just before stopping, it further decelerates to a definite stop. The realistic movement enhances the scenery of the engine compartment. One-touch wiring with connectors eliminates the need for complicated electrical wiring. Anyone can easily integrate it into a layout. Power is supplied to the tracks from the turntable. The turntable girders feed power to the connected front and rear tracks to enable running. A full range of optional structures are included, including a set of engine yard facilities perfect for recreating an engine yard with turntables. [Set Contents] Main unit, turntable controller, AC adapter power supply, controller connection cord, 1 jump cord, 4 adjacent tracks (straight), 2 perimeter tracks (3 lines), 6 car stops, 2 unijoiners, 6 insulated joiners (single piece). It is in good condition. The language of this item is Japanese. Please check the condition in the pictures. All my products are 100% Authentic. We do not mark merchandise values below value or mark items as. Japan, US and International government regulations prohibit such behavior. International Buyers – Please Note. Thank you for your understanding.

KATO Unitrack Electric Turntable 20-283 Steam locomotive structure N Scale F/S. Turntable is indispensable for enjoying steam locomotives. The definitive steam locomotive structure! Reproduction of a type with a relatively shallow pit, called a “lower road type, ” with specifications designed for ease of use that are also compatible with sit-down operation. The track arrangement angle of the turntable is 10°. Outer diameter of the main body is 217mm. 160mm turntable girder length allows for large steamers! The thickness of the turntable is 12mm, 5mm thicker than the 7mm of Unitrack’s track top surface. Height adjustment outside of adjacent tracks. Automatic auto-locking advance system with left/right rotation and stop and precise drive by controller switch operation. Realistic turning speed of approximately 1 minute per lap. Just before stopping, it further decelerates to a definite stop. The realistic movement enhances the scenery of the engine compartment. One-touch wiring with connectors eliminates the need for complicated electrical wiring. Anyone can easily integrate it into a layout. Power is supplied to the tracks from the turntable. The turntable girders feed power to the connected front and rear tracks to enable running. A full range of optional structures are included, including an engine yard facility set that is perfect for reproducing an engine yard with turntable. [Contents] Main unit, turntable controller, AC adapter power supply, controller connection cord, 1 jump cord, 4 adjacent tracks (straight), 2 perimeter tracks (3 lines), 6 car stops, 2 unijoiners, 6 insulated joiners (single piece). We do not mark merchandise values below value or mark items as? Japan, US and International government regulations prohibit such behavior. About Importer’s Obligation. Thank you for your understanding.

KATO Unitrack Electric Turntable 20-283 Steam locomotive structure N Scale New. Product introduction A turntable is essential for enjoying steam locomotives. The definitive version of steam locomotive structure! It reproduces a type with a relatively shallow pit called the Shimoji type, and is designed to be easy to use and suitable for driving in a tatami room. The track arrangement angle of the turntable is 10°. The outer diameter of the main body is 217mm. The turntable girder length is 160mm, making it suitable for large steam machines! The thickness of the turntable is 12mm. 5mm up compared to Unitrack’s track top surface of 7mm. Height adjustment on the outside of the adjacent track. By operating a switch on the controller, it rotates and stops left and right, and uses an auto-lock type automatic advance angle that accurately drives. Realistic turning speed of about 1 minute per revolution. Just before stopping, it decelerates further to ensure it stops. The realistic movement enhances the scenery of the engine room. Connector-type one-touch wiring eliminates the need for any complicated electrical wiring. Anyone can easily incorporate it into the layout. Power is supplied to the line from the turntable. The turntable girder supplies power to the connected front and rear tracks, making it possible to travel. [Set contents] Main unit, turntable controller, AC adapter power supply, controller connection cord, 1 jump cord, 4 adjacent tracks (straight lines), 2 outer tracks (3 lines), 6 car stops, 2 unijoiners? Insulation joiner (piece) 6 pieces. About other area, please ask me. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.