KATO N gauge electric turntable 20-283 railway model supplies. A turntable is essential for enjoying steam locomotives. The definitive steam locomotive structure! It reproduces the type with a relatively shallow pit called the underpass type, and is designed to be easy to use for tatami mat driving. The turntable’s track arrangement angle is 10°. The outer diameter of the main body is 217mm. The turntable girder length is 160mm, so it can accommodate large steam locomotives! The turntable is 12mm thick. It is 5mm thicker than the 7mm above the track of the Unitrack. The height can be adjusted outside the adjacent track. The controller switch allows you to rotate left and right and stop, and it uses an auto-lock type automatic advance angle that drives accurately. Realistic turning speed of about 1 minute per revolution. It slows down even further just before stopping and stops reliably. The realistic movement enhances the locomotive depot scenery. The connector type one-touch wiring means no complicated electrical wiring is required. Anyone can easily incorporate it into their layout. Power to the track is supplied from the turntable. The turntable girder supplies power to the connected tracks in front and behind, allowing the train to run. [Set contents] Main unit, turntable controller, AC adapter power supply, controller connection cord, 1 jump cord, 4 adjacent tracks (straight), 2 outer tracks (3 tracks), 6 car stops, 2 unijoiners, 6 insulated joiners (single). We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior. About Importer’s Obligation. Thank you for your understanding.

Turntable is indispensable for enjoying steam locomotives. The definitive steam locomotive structure! Reproduction of a type with a relatively shallow pit, called a “lower road type, ” with specifications designed for ease of use that are also compatible with sit-down operation. The track arrangement angle of the turntable is 10°. Outer diameter of the main body is 217mm. 160mm turntable girder length allows for large steamers! The thickness of the turntable is 12mm, 5mm thicker than the 7mm of Unitrack’s track top surface. Height adjustment outside of adjacent tracks. Automatic auto-locking advance system with left/right rotation and stop and precise drive by controller switch operation. Realistic turning speed of approximately 1 minute per lap. Just before stopping, it further decelerates to a definite stop. The realistic movement enhances the scenery of the engine compartment. One-touch wiring with connectors eliminates the need for complicated electrical wiring. Anyone can easily integrate it into a layout. Power is supplied to the tracks from the turntable. The turntable girders feed power to the connected front and rear tracks to enable running. A full range of optional structures are included, including a set of engine yard facilities perfect for recreating an engine yard with turntables. [Set Contents] Main unit, turntable controller, AC adapter power supply, controller connection cord, 1 jump cord, 4 adjacent tracks (straight), 2 perimeter tracks (3 lines), 6 car stops, 2 unijoiners, 6 insulated joiners (single piece). It is in good condition. The language of this item is Japanese. Please check the condition in the pictures. All my products are 100% Authentic. We do not mark merchandise values below value or mark items as. Japan, US and International government regulations prohibit such behavior. International Buyers – Please Note. Thank you for your understanding.

KATO Unitrack Electric Turntable 20-283 Steam locomotive structure N Scale F/S. Turntable is indispensable for enjoying steam locomotives. The definitive steam locomotive structure! Reproduction of a type with a relatively shallow pit, called a “lower road type, ” with specifications designed for ease of use that are also compatible with sit-down operation. The track arrangement angle of the turntable is 10°. Outer diameter of the main body is 217mm. 160mm turntable girder length allows for large steamers! The thickness of the turntable is 12mm, 5mm thicker than the 7mm of Unitrack’s track top surface. Height adjustment outside of adjacent tracks. Automatic auto-locking advance system with left/right rotation and stop and precise drive by controller switch operation. Realistic turning speed of approximately 1 minute per lap. Just before stopping, it further decelerates to a definite stop. The realistic movement enhances the scenery of the engine compartment. One-touch wiring with connectors eliminates the need for complicated electrical wiring. Anyone can easily integrate it into a layout. Power is supplied to the tracks from the turntable. The turntable girders feed power to the connected front and rear tracks to enable running. A full range of optional structures are included, including an engine yard facility set that is perfect for reproducing an engine yard with turntable. [Contents] Main unit, turntable controller, AC adapter power supply, controller connection cord, 1 jump cord, 4 adjacent tracks (straight), 2 perimeter tracks (3 lines), 6 car stops, 2 unijoiners, 6 insulated joiners (single piece). We do not mark merchandise values below value or mark items as? Japan, US and International government regulations prohibit such behavior. About Importer’s Obligation. Thank you for your understanding.

KATO Unitrack Electric Turntable 20-283 Steam locomotive structure N Scale New. Product introduction A turntable is essential for enjoying steam locomotives. The definitive version of steam locomotive structure! It reproduces a type with a relatively shallow pit called the Shimoji type, and is designed to be easy to use and suitable for driving in a tatami room. The track arrangement angle of the turntable is 10°. The outer diameter of the main body is 217mm. The turntable girder length is 160mm, making it suitable for large steam machines! The thickness of the turntable is 12mm. 5mm up compared to Unitrack’s track top surface of 7mm. Height adjustment on the outside of the adjacent track. By operating a switch on the controller, it rotates and stops left and right, and uses an auto-lock type automatic advance angle that accurately drives. Realistic turning speed of about 1 minute per revolution. Just before stopping, it decelerates further to ensure it stops. The realistic movement enhances the scenery of the engine room. Connector-type one-touch wiring eliminates the need for any complicated electrical wiring. Anyone can easily incorporate it into the layout. Power is supplied to the line from the turntable. The turntable girder supplies power to the connected front and rear tracks, making it possible to travel. [Set contents] Main unit, turntable controller, AC adapter power supply, controller connection cord, 1 jump cord, 4 adjacent tracks (straight lines), 2 outer tracks (3 lines), 6 car stops, 2 unijoiners? Insulation joiner (piece) 6 pieces. About other area, please ask me. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

KATO Unitrack Electric Turntable 20-283 Steam locomotive structure N Scale Toy. This product data sheet is originally written in English. Contents? Body? Turntable controller? AC adapter power supply? Controller connection cord? 1 jump cord? 4 adjacent tracks (straight lines)? 2 perimeter tracks (3 lines)? 6 car stops? 2 unijoiners? Insulation joiner (piece) 6 pieces. (Remarks) There may be a remote surchage for some areas in Australia, Canada, and Europe. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. KATO Unitrack Electric Turntable 20-283 Steam locomotive structure N Scale Toy There may be a remote surchage for some areas in Australia, Canada, and Europe. All of my item is genuine and authentic, I never sell any kind of third party item. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohi. California Prop 65 Warning. Main unit, turntable controller, AC adapter p.

KATO Unitrack Electric Turntable 20-283 Steam locomotive structure N Scale Toy. Tajima Fuga Body Full Set FB-AA28SEGW Jacket Cooling Fan New. Lenovo Thinkpad 25 25th Anniversary Tested From Japan. Keyence NR-HA08 Analog Module New. Keyence NR-HA08 Analog Module Used Excellent Tested. HKS 50003-M45iL Super Fire Racing Plug 8 Stück, lange Reichweite, neu aus Japan. Keyence CB-EP100 Used Tested. Add suggested items to your listings.

KATO Unitrack Electric Turntable 20-283 Steam locomotive structure N Scale Toy. A turntable is essential for enjoying steam locomotives. The definitive steam locomotive structure! Reproduces a type with a relatively shallow pit called the Shimoji type, and is designed for ease of use and is suitable for driving in a private room. The track arrangement angle of the turntable is 10°. The outer diameter of the main body is 217mm. The turntable girder length is 160mm, which is suitable for large steam machines! The thickness of the turntable is 12mm. 5mm up compared to Unitrack’s track top surface of 7mm. Height adjustment on the outside of the adjacent track. By operating a switch on the controller, it rotates and stops left and right, and uses an auto-lock type automatic advance angle that accurately drives. Realistic turning speed of about 1 minute per revolution. Just before stopping, it decelerates further to ensure it stops. The realistic movement enhances the scenery of the engine room. Connector-type one-touch wiring eliminates the need for any complicated electrical wiring. Anyone can easily incorporate it into the layout. Power is supplied to the line from the turntable. The turntable girder supplies power to the connected front and rear tracks, making it possible to travel. Main unit, turntable controller, AC adapter power supply, controller connection cord, 1 jump cord, 4 adjacent tracks (straight lines), 2 outer tracks (3 lines), 6 car stops, 2 unijoiners? Insulation joiner (piece) 6 pieces. We accept the item in original condition only.

KATO Unitrack Electric Turntable 20-283. Steam locomotive structure N Scale Toy. Product Introduction The turntable is indispensable for enjoying steam locomotives. The definitive version of the steam locomotive structure! Reproduction of the type with a relatively shallow pit, called the “lower road type, ” with specifications designed for ease of use that are also compatible with sit-down operation. 10° angle of track arrangement on the turntable is adopted. The outer diameter of the main body is 217mm, and the length of the turntable girder is 160mm, which can accommodate even large steamers! Turntable thickness is 12mm 5mm up compared to 7mm on the top of the Uni-Track tracks. Height adjustment outside of adjacent tracks. Automatic auto-locking advance system with left/right rotation and stop and precise drive by controller switch operation. Realistic turning speed of approximately 1 minute per lap. Just before stopping, the machine further decelerates to a definite stop. The realistic movement enhances the scenery of the engine compartment. One-touch wiring with connectors eliminates the need for complicated electrical wiring. Anyone can easily integrate it into a layout. Power is supplied to the tracks from the turntable. The turntable girders feed power to the connected front and rear tracks to enable running. A full range of optional structures are included, including a set of engine yard facilities perfect for recreating an engine yard with turntables. [Set includes] Main unit Turntable controller AC adapter power supply Cord for controller connection Jump cord x 1 Adjacent lines (straight) x 4 Outer circumference wire line (3 lines) × 2 Car stop x 6 Unijoiner × 2 Insulation joiner (piece) × 6. If you have any question or concern, please do not hesitate to contact me. Thank you for visiting. Please Note for International Buyers. Generally, those additional costs will be charged by the carrier when you receive the item.